Product Search

    SEARCH NOW FOR ALL YOUR IDC USA SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 496.
    IDC USA H40B20

    IDC USA

    H40B20

    SPROCKETS: PLAIN BORE
    ✓ IN STOCK!
    £9.71 Price with VAT: £11.65 Buy Surplus As Low As £5.38 Price with VAT: £6.45
    £5.38 Price with VAT: £6.45
    IDC USA H40B40

    IDC USA

    H40B40

    SPROCKET, PLAIN BORE, HARDENED TEETH, 1/2 INCH ANSI 40 CHAIN PITCH, 0.284 INCH NOMINAL WIDTH ACROSS TEETH, 6.65 INCH OUTER DIAMETER, 6.373 INCH PITCH DIAMETER, C1045 STEEL, HUB TYPE B
    ✓ IN STOCK!
    £36.54 Price with VAT: £43.85 Buy Surplus As Low As £12.32 Price with VAT: £14.78
    £12.32 Price with VAT: £14.78
    IDC USA H40BTL14

    IDC USA

    H40BTL14

    SPROCKET, ROLLER CHAIN, BUSHING BORE, SIZE 1008 BUSHING, 14 TEETH, STEEL
    ✓ IN STOCK!
    £8.74 Price with VAT: £10.49 Buy Surplus As Low As £3.82 Price with VAT: £4.59
    £3.82 Price with VAT: £4.59
    IDC USA SH21

    IDC USA

    SH21

    DISCONTINUED BY MANUFACTURER, SHUT HEIGHT DISPLAY MODULE, DISPLAY IN INCHES, WITH COVER
    Buy Surplus As Low As £253.52 Price with VAT: £304.22
    £253.52 Price with VAT: £304.22
    Repair Yours £220.94 Price with VAT: £265.13
    IDC USA 6204-ZZ

    IDC USA

    6204-ZZ

    DISCONTINUED BY MANUFACTURER, BALL BEARING, DOUBLE SHIELDED, SINGLE ROW, 20 X 47 X 14 MM
    ✓ IN STOCK!
    Buy Surplus As Low As £17.87 Price with VAT: £21.45
    £17.87 Price with VAT: £21.45
    IDC USA TL22H100-1610

    IDC USA

    TL22H100-1610

    IDC USA , TL22H100-1610 , TL22H1001610 , TAPER-LOCK TIMING PULLEY , 1/2 INCH PITCH [H] FOR 1.0", 2" AND 3" WIDE BELTS , CF TYPE , 22 TEETH , 3.501 DIA. PITCH , 3.447 OD PULLEY , 3-3/4 OD FLA ...
    ✓ IN STOCK!
    £43.17 Price with VAT: £51.80 Buy Surplus As Low As £22.59 Price with VAT: £27.11
    £22.59 Price with VAT: £27.11
    IDC USA 3020-1-7/8

    IDC USA

    3020-1-7/8

    TAPERLOCK BUSHING, IDC SELECT, ANSI STANDARD DESIGN, CLEAN AND COMPACT, 790 IN-LB, 8-DEGREE TAPER, 4-1/4 INCH BARREL DIAMETER, 1-7/8 INCH BORE DIAMETER, 4 INCH BOLT DIAMETER, FLUSH MOUNT, NO ...
    ✓ IN STOCK!
    £51.12 Price with VAT: £61.35 Buy Surplus As Low As £28.14 Price with VAT: £33.77
    £28.14 Price with VAT: £33.77
    IDC USA 2517-1-1/2

    IDC USA

    2517-1-1/2

    TAPERLOCK BUSHING, IDC SELECT, ANSI STANDARD DESIGN, CLEAN / COMPACT, 790 IN-LB, 8-DEGREE TAPER, 3-3/8 INCH BARREL DIA, 1-1/2 INCH BORE DIA, 3-1/2 INCH INCH BOLT DIA, 1-3/4 INCH OVERALL LENG ...
    ✓ IN STOCK!
    £33.99 Price with VAT: £40.78 Buy Surplus As Low As £16.39 Price with VAT: £19.67
    £16.39 Price with VAT: £19.67
    IDC USA 6207-2RS

    IDC USA

    6207-2RS

    DISCONTINUED BY MANUFACTURER, RADIAL/DEEP GROOVE BALL BEARING, 35 MM ID, 72 MM OD, 17 MM WIDTH
    ✓ IN STOCK!
    Buy Surplus As Low As £18.29 Price with VAT: £21.95
    £18.29 Price with VAT: £21.95
    IDC USA 6901ZZ

    IDC USA

    6901ZZ

    BEARING, 12MM ID,24MM OD, 6MM WIDTH
    ✓ IN STOCK!
    £3.73 Price with VAT: £4.47 Buy Surplus As Low As £2.55 Price with VAT: £3.06
    £2.55 Price with VAT: £3.06
    IDC USA IDC SF-1-7/16

    IDC USA

    IDC SF-1-7/16

    QD STYLE BUSHING, SPLIT BARREL AND FLANGE, 1 7/16 IN BORE DIAMETER, 3 SET SCREWS
    £55.27 Price with VAT: £66.33 Buy Surplus As Low As £34.49 Price with VAT: £41.38
    £34.49 Price with VAT: £41.38
    IDC USA L100 X 1 1/8

    IDC USA

    L100 X 1 1/8

    COUPLING JAW, FINISHED BORE, SET-SCREW, KEYWAY
    ✓ IN STOCK!
    £31.37 Price with VAT: £37.65 Buy Surplus As Low As £19.36 Price with VAT: £23.23
    £19.36 Price with VAT: £23.23
    IDC USA Q1-2-3/16

    IDC USA

    Q1-2-3/16

    BUSHING, IDC SELECT, SPLIT TAPER, DOUBLE, 2-3/16 INCH DIAMETER BORE, FINISHED BORE, NODULAR GRAPHITE CAST IRON
    ✓ IN STOCK!
    £49.30 Price with VAT: £59.16 Buy Surplus As Low As £30.86 Price with VAT: £37.03
    £30.86 Price with VAT: £37.03
    IDC USA UCP207-23

    IDC USA

    UCP207-23

    BEARING, IDC SELECT, PILLOW BLOCK, STANDARD DUTY, 2-BOLT, SET SCREW MOUNT
    ✓ IN STOCK!
    £41.30 Price with VAT: £49.56 Buy Surplus As Low As £24.39 Price with VAT: £29.27
    £24.39 Price with VAT: £29.27
    IDC USA 1654 2RS

    IDC USA

    1654 2RS

    DISCONTINUED BY MANUFACTURER, BALL BEARING, DEEP GROOVE, 1-1/4 INCH BORE X 2-1/2 INCH OUTSIDE DIMENTION
    ✓ IN STOCK!
    Buy Surplus As Low As £16.17 Price with VAT: £19.41
    £16.17 Price with VAT: £19.41
    IDC USA N316

    IDC USA

    N316

    DISCONTINUED BY MANUFACTURER, CYLINDRICAL ROLLER, SINGLE ROW, 80 MM X 170 MM X 39 MM
    ✓ IN STOCK!
    Buy Surplus As Low As £184.74 Price with VAT: £221.69
    £184.74 Price with VAT: £221.69
    IDC USA H50B16F-1-1/4

    IDC USA

    H50B16F-1-1/4

    FINISHED BORE SPROCKET, 16 TEETH, 1-1/4IN BORE
    ✓ IN STOCK!
    £15.07 Price with VAT: £18.09 Buy Surplus As Low As £8.28 Price with VAT: £9.93
    £8.28 Price with VAT: £9.93
    IDC USA H50B14F-1-1/4

    IDC USA

    H50B14F-1-1/4

    FINISHED BORE SPROCKET, 14 TEETH, 5/16IN SCREW, 5/8IN PITCH, STEEL
    ✓ IN STOCK!
    £19.13 Price with VAT: £22.96 Buy Surplus As Low As £11.59 Price with VAT: £13.91
    £11.59 Price with VAT: £13.91
    IDC USA H-1-3/8

    IDC USA

    H-1-3/8

    TAPERED BUSHING, STYLE H, SPLIT BARREL/FLANGE, KEYWAY, 1-3/8INCH BUSHING SIZE, CAST IRON MATERIAL
    ✓ IN STOCK!
    £18.29 Price with VAT: £21.94 Buy Surplus As Low As £11.26 Price with VAT: £13.52
    £11.26 Price with VAT: £13.52
    IDC USA 6800-2RS

    IDC USA

    6800-2RS

    BEARING, 10MM ID,19MM OD,5MM WIDTH
    ✓ IN STOCK!
    £1.85 Price with VAT: £2.21 Buy Surplus As Low As £1.14 Price with VAT: £1.36
    £1.14 Price with VAT: £1.36
    IDC USA 6904-2RS

    IDC USA

    6904-2RS

    BEARING,20MM ID, 37MM OD, 9MM WIDTH,SEALED
    ✓ IN STOCK!
    £8.22 Price with VAT: £9.86 Buy Surplus As Low As £4.55 Price with VAT: £5.46
    £4.55 Price with VAT: £5.46
    IDC USA SER207-20

    IDC USA

    SER207-20

    DISCONTINUED BY MANUFACTURER, INSERT BEARING, SNAP RING, SCREWS, RUBBER SEAL, 57800 LOAD CAPACITY
    ✓ IN STOCK!
    Buy Surplus As Low As £9.48 Price with VAT: £11.37
    £9.48 Price with VAT: £11.37
    IDC USA H40B13F-1

    IDC USA

    H40B13F-1

    SPROCKET, FINISHED BORE, 13 TEETH, 2.33 INCH OUTSIDE DIAMETER, 1 INCH BORE DIAMETER, 13 TEETH, BLACK OXIDE FINISH, 40 BORE SERIES
    ✓ IN STOCK!
    £13.45 Price with VAT: £16.13 Buy Surplus As Low As £7.63 Price with VAT: £9.15
    £7.63 Price with VAT: £9.15
    IDC USA H35B28F-3/4

    IDC USA

    H35B28F-3/4

    SPROCKET, FINISHED BORE, 3/4 INCH BORE DIAMETER, 28 TEETH, 3/8 INCH PITCH, BLACK OXIDE FINISH
    ✓ IN STOCK!
    £18.67 Price with VAT: £22.41 Buy Surplus As Low As £10.35 Price with VAT: £12.41
    £10.35 Price with VAT: £12.41
    IDC USA SSER12

    IDC USA

    SSER12

    STAINLESS STEEL INSERT W/SNAP RING, SET SCREWS 120 DEGRESS APART, LUBRICATION GROOVE WITH HOLE OPPOSITE SET SCREW SIDE
    ✓ IN STOCK!
    £116.53 Price with VAT: £139.83 Buy Surplus As Low As £63.71 Price with VAT: £76.45
    £63.71 Price with VAT: £76.45
    IDC USA 2517-2-3/16

    IDC USA

    2517-2-3/16

    BUSHING, 2517 SERIES, IDC SELECT, TAPERED LOCK, 2.1875 INCH BORE, 3.375 INCH OUTSIDE DIAMETER, 2 BOLT HOLE
    ✓ IN STOCK!
    £41.14 Price with VAT: £49.37 Buy Surplus As Low As £28.52 Price with VAT: £34.22
    £28.52 Price with VAT: £34.22
    IDC USA 2012-50MM

    IDC USA

    2012-50MM

    TAPER LOCK B USHING - 2012 SERIES, 50 MM BORE, 14 X 3.8 MM KEYWAY, STEEL MATERIAL, 2 SCREW
    ✓ IN STOCK!
    £20.91 Price with VAT: £25.10 Buy Surplus As Low As £11.98 Price with VAT: £14.38
    £11.98 Price with VAT: £14.38
    IDC USA SH-3/4

    IDC USA

    SH-3/4

    DISCONTINUED BY MANUFACTURER, BUSHING, SH SERIES, QD STYLE, BORE TYPE FINISHED W/ KEYWAY, BORE DIAMETER 3/4', FLANGE THICKNESS 7/16', CAST IRON MATERIAL
    ✓ IN STOCK!
    Buy Surplus As Low As £16.34 Price with VAT: £19.60
    £16.34 Price with VAT: £19.60
    IDC USA P13L050.5

    IDC USA

    P13L050.5

    TIMING PULLEY, 13 TEETH, 1.552 PITCH DIAMETER, 1.522 PULLEY OD, 3/4 BORE
    ✓ IN STOCK!
    £14.19 Price with VAT: £17.03 Buy Surplus As Low As £8.17 Price with VAT: £9.81
    £8.17 Price with VAT: £9.81
    IDC USA 1610X5/8

    IDC USA

    1610X5/8

    TAPER LOCK BUSHING , 1610 SERIES, 5/8 IN BORE, 3/16 X 3/32 IN KEYWAY, SINTERED STEEL MATERIAL
    ✓ IN STOCK!
    £56.77 Price with VAT: £68.12 Buy Surplus As Low As £35.09 Price with VAT: £42.11
    £35.09 Price with VAT: £42.11
    IDC USA R10 ZZ

    IDC USA

    R10 ZZ

    MINIATURE DEEP GROOVE BALL BEARING, 5/8’’, MATERIAL: STEEL, DOUBLE SHIELD, LOAD CAPACITY: 1347 LB, 18000 RPM GREASE/22000 RPM OIL, OUTSIDE DIAMETER 1-3/8’’, STEEL, R SERIES, WIDTH: 0.3438’’
    ✓ IN STOCK!
    £16.43 Price with VAT: £19.72 Buy Surplus As Low As £12.70 Price with VAT: £15.24
    £12.70 Price with VAT: £15.24
    IDC USA 6800ZZ

    IDC USA

    6800ZZ

    DISCONTINUED BY MANUFACTURER, BALL BEARING, SINGLE ROW, SHIELDED, 10 MM BORE, 19 MM OUTER DIAMETER, 5 MM WIDTH, STATIC/DYNAMIC LOAD: 208/410 LBF, 30000 RPM
    ✓ IN STOCK!
    Buy Surplus As Low As £4.54 Price with VAT: £5.45
    £4.54 Price with VAT: £5.45
    IDC USA SH1

    IDC USA

    SH1

    BUSHING 1IN BORE W/KEYWAY
    £16.43 Price with VAT: £19.72 Buy Surplus As Low As £9.71 Price with VAT: £11.65
    £9.71 Price with VAT: £11.65
    IDC USA H-32MM

    IDC USA

    H-32MM

    SPLIT TAPER BUSHING 32MM BORE KRYWAY 10MM X 4MM
    £9.71 Price with VAT: £11.65 Buy Surplus As Low As £5.70 Price with VAT: £6.84
    £5.70 Price with VAT: £6.84
    IDC USA 100-3R

    IDC USA

    100-3R

    (PRICE/ FT) 10' BOX
    £32.87 Price with VAT: £39.44 Buy Surplus As Low As £20.17 Price with VAT: £24.20
    £20.17 Price with VAT: £24.20
    IDC USA 16B-1-10

    IDC USA

    16B-1-10

    ROLLER CHAIN 10FT
    £130.72 Price with VAT: £156.86 Buy Surplus As Low As £78.43 Price with VAT: £94.12
    £78.43 Price with VAT: £94.12
    IDC USA P20H100

    IDC USA

    P20H100

    PULLEY 20TEETH 1IN BORE
    £26.14 Price with VAT: £31.37 Buy Surplus As Low As £13.45 Price with VAT: £16.13
    £13.45 Price with VAT: £16.13
    IDC USA 3/5V1320E

    IDC USA

    3/5V1320E

    SHEAVE 3GROOVE CAST IRON
    £236.78 Price with VAT: £284.14 Buy Surplus As Low As £118.77 Price with VAT: £142.52
    £118.77 Price with VAT: £142.52
    IDC USA 45V1090E

    IDC USA

    45V1090E

    SHEAVE CAST IRON 4-GROOVE
    £261.43 Price with VAT: £313.72 Buy Surplus As Low As £156.86 Price with VAT: £188.23
    £156.86 Price with VAT: £188.23
    IDC USA 4B64SD

    IDC USA

    4B64SD

    SHEAVES
    £64.24 Price with VAT: £77.09 Buy Surplus As Low As £32.12 Price with VAT: £38.54
    £32.12 Price with VAT: £38.54
    IDC USA 4B80SK

    IDC USA

    4B80SK

    SHEAVES
    £77.68 Price with VAT: £93.22 Buy Surplus As Low As £47.06 Price with VAT: £56.47
    £47.06 Price with VAT: £56.47
    IDC USA 4B86SK

    IDC USA

    4B86SK

    SHEAVES
    £81.42 Price with VAT: £97.70 Buy Surplus As Low As £49.30 Price with VAT: £59.16
    £49.30 Price with VAT: £59.16
    IDC USA 4B94SK

    IDC USA

    4B94SK

    SHEAVES
    £93.37 Price with VAT: £112.04 Buy Surplus As Low As £56.02 Price with VAT: £67.23
    £56.02 Price with VAT: £67.23
    IDC USA 5012CC

    IDC USA

    5012CC

    COUPLING CHAIN
    £9.71 Price with VAT: £11.65 Buy Surplus As Low As £5.70 Price with VAT: £6.84
    £5.70 Price with VAT: £6.84
    IDC USA 50-1R

    IDC USA

    50-1R

    (PRICE/ FT) 10' BOX
    £3.17 Price with VAT: £3.80 Buy Surplus As Low As £1.90 Price with VAT: £2.28
    £1.90 Price with VAT: £2.28
    IDC USA 50-1R-100

    IDC USA

    50-1R-100

    (PRICE/ RL) 100' ROLL
    £245.00 Price with VAT: £294.00 Buy Surplus As Low As £122.50 Price with VAT: £147.00
    £122.50 Price with VAT: £147.00
    IDC USA 50-1R-50

    IDC USA

    50-1R-50

    (PRICE/ RL) 50' ROLL
    £116.53 Price with VAT: £139.83 Buy Surplus As Low As £70.21 Price with VAT: £84.26
    £70.21 Price with VAT: £84.26
    IDC USA 50-2CL

    IDC USA

    50-2CL

    CHAIN
    £1.78 Price with VAT: £2.14 Buy Surplus As Low As £1.07 Price with VAT: £1.28
    £1.07 Price with VAT: £1.28
    IDC USA 50-3R

    IDC USA

    50-3R

    (PRICE/ FT) 10' BOX
    £9.71 Price with VAT: £11.65 Buy Surplus As Low As £5.70 Price with VAT: £6.84
    £5.70 Price with VAT: £6.84
    IDC USA 5050

    IDC USA

    5050

    TAPER LOCK BUSHING
    £124.74 Price with VAT: £149.69 Buy Surplus As Low As £74.70 Price with VAT: £89.63
    £74.70 Price with VAT: £89.63
    Previous Next
    1 2 3 4 5 6 7 8 9 10